福利一区二区在线观看_综合三级亚洲高清_精品免费视频在线观看_男下部进入女人下部猛进猛出_亚洲精品中文字幕久久无_成人黄色免费毛片_能看见球和皮日皮的视频_国产一区av高清_日韩真人做a爱免费视频_性开放推油按摩AV大片

第一個為非DMA模式的多通道采集

void ADC_DMA_Config(void) 

{
ADC_InitTypeDef ADC_InitStructure;

RCC_HSICmd(ENABLE);
while(RCC_GetFlagStatus(RCC_FLAG_HSIRDY) == RESET);  
RCC_APB2PeriphClockCmd(RCC_APB2Periph_ADC1, ENABLE);
ADC_DeInit(ADC1);
ADC_StructInit(&ADC_InitStructure);
ADC_InitStructure.ADC_Resolution = ADC_Resolution_8b; 
ADC_InitStructure.ADC_ScanConvMode = DISABLE;  //禁止掃描模式
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;  //連續轉換
ADC_InitStructure.ADC_ExternalTrigConvEdge = ADC_ExternalTrigConvEdge_None; 
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right; 
ADC_InitStructure.ADC_NbrOfConversion = 1;

ADC_Init(ADC1,&ADC_InitStructure);

/*沒有采用中斷和DMA方式，這樣采樣得到的數據很容易丟失，因為規則通道公用一個數據寄存器，因此需要在一個轉換周期內讀出數據，緊接著讀取下一個通道的數據。*/

ADC_DelaySelectionConfig(ADC1, ADC_DelayLength_Freeze);//推遲到轉換后的數據被讀取

ADC_PowerDownCmd(ADC1, ADC_PowerDown_Idle_Delay, ENABLE);//在延遲和空閑階段ADC是關閉的

/* Enable ADC1 */
ADC_Cmd(ADC1, ENABLE);
/* Wait until the ADC1 is ready */
while(ADC_GetFlagStatus(ADC1, ADC_FLAG_ADONS) == RESET)
{ 
}

}

uint16_t  GetADCValue(uint32_t CH_Data )//獲取通道數據
{
    unsigned char  i;
    for(i=0; i<3; i++)
    {
        AD_Value[i] = 0xFF;
        switch (i)
        {
            case 0: ADC_RegularChannelConfig(ADC1, ADC_Channel_2, 1, ADC_SampleTime_9Cycles); break;
            case 1: ADC_RegularChannelConfig(ADC1, ADC_Channel_3, 1, ADC_SampleTime_9Cycles); break;
    default: ADC_RegularChannelConfig(ADC1, ADC_Channel_3, 1, ADC_SampleTime_9Cycles); break;
        }
ADC_Cmd(ADC1, ENABLE);
       // ADC_TempSensorVrefintCmd(ENABLE);
        ADC_SoftwareStartConv(ADC1);
        while (ADC_GetFlagStatus(ADC1, ADC_FLAG_EOC) == RESET) 
        AD_Value[i] = ADC_GetConversionValue(ADC1);
        ADC_ClearFlag(ADC1, ADC_FLAG_EOC);
        ADC_SoftwareStartConv(ADC1);
        ADC_Cmd(ADC1, DISABLE);
    }
return AD_Value[CH_Data];
}

第二個為dma多通道采樣與注入采樣

__IO uint16_t ADC_ConvertedValue[2];//內存緩存adc通道數據

void ADC1_Mode_Config(void)
{
DMA_InitTypeDef DMA_InitStructure;
ADC_InitTypeDef ADC_InitStructure;

/* DMA channel1 configuration */
DMA_DeInit(DMA1_Channel1);

DMA_InitStructure.DMA_PeripheralBaseAddr = ADC1_DR_Address;//ADC地址
DMA_InitStructure.DMA_MemoryBaseAddr = (u32)&ADC_ConvertedValue;//內存地址
DMA_InitStructure.DMA_DIR = DMA_DIR_PeripheralSRC;
DMA_InitStructure.DMA_BufferSize = 2;
DMA_InitStructure.DMA_PeripheralInc = DMA_PeripheralInc_Disable;//外設地址固定
DMA_InitStructure.DMA_MemoryInc = DMA_MemoryInc_Enable;  //內存地址后移
DMA_InitStructure.DMA_PeripheralDataSize = DMA_PeripheralDataSize_HalfWord;//半字
DMA_InitStructure.DMA_MemoryDataSize = DMA_MemoryDataSize_HalfWord;
DMA_InitStructure.DMA_Mode = DMA_Mode_Circular;
DMA_InitStructure.DMA_Priority = DMA_Priority_High;
DMA_InitStructure.DMA_M2M = DMA_M2M_Disable;
DMA_Init(DMA1_Channel1, &DMA_InitStructure);

/* Enable DMA channel1 */
DMA_Cmd(DMA1_Channel1, ENABLE);

/* ADC1 configuration */
ADC_InitStructure.ADC_Mode = ADC_Mode_Independent;//獨立ADC模式
ADC_InitStructure.ADC_ScanConvMode = ENABLE ; //開掃描模式
ADC_InitStructure.ADC_ContinuousConvMode = ENABLE;//連續轉換
ADC_InitStructure.ADC_ExternalTrigConv = ADC_ExternalTrigConv_None;//軟件觸發
ADC_InitStructure.ADC_DataAlign = ADC_DataAlign_Right; 
ADC_InitStructure.ADC_NbrOfChannel = 2;//轉換通道數目
ADC_Init(ADC1, &ADC_InitStructure);


ADC_TempSensorVrefintCmd(ENABLE);
ADC_RegularChannelConfig(ADC1, ADC_Channel_TempSensor, 1, ADC_SampleTime_55Cycles5);
ADC_RegularChannelConfig(ADC1, ADC_Channel_11, 2, ADC_SampleTime_55Cycles5);


ADC_InjectedSequencerLengthConfig(ADC1, 1); //注入通道與其長度
  ADC_InjectedChannelConfig(ADC1,ADC_Channel_11,1,ADC_SampleTime_7Cycles5);
// ADC_SetInjectedOffset(ADC1, ADC_InjectedChannel_1, 1000);//設置偏置電壓值

ADC_ExternalTrigInjectedConvConfig(ADC1, ADC_ExternalTrigInjecConv_None);

ADC_ExternalTrigConvCmd(ADC1, DISABLE); //禁止外部觸發
ADC_ExternalTrigInjectedConvCmd(ADC1, DISABLE);
//ADC_AutoInjectedConvCmd(ADC1,ENABLE); //規則通道自動轉換到注入通道
/* Enable ADC1 DMA */
ADC_DMACmd(ADC1, ENABLE);
/* Enable ADC1 */
ADC_Cmd(ADC1, ENABLE);

ADC_ResetCalibration(ADC1);
while(ADC_GetResetCalibrationStatus(ADC1));
ADC_StartCalibration(ADC1);
while(ADC_GetCalibrationStatus(ADC1));
ADC_SoftwareStartConvCmd(ADC1, ENABLE);
}

由下面代碼可以得到注入通道ad值

ADC_SoftwareStartInjectedConvCmd(ADC1, ENABLE);//啟動adc注入通道
while(RESET ==ADC_GetFlagStatus(ADC1,ADC_FLAG_JEOC));//等待轉換完成
value=ADC_GetInjectedConversionValue(ADC1,ADC_InjectedChannel_1);//得到第一組的值

終于把ADC的非DMA的多通道采集完成，也是參考的網上的例子，學會了很多。其中要根據自己需求注意ADC是掃描模式，ADC是單次轉換還是連續轉換，還有ADC的模式也要注意。覺得ADC很博大精深，自己還得好好研究一番。